Get Electrical Contractor Work Completion And Test Report

Filling out the Electrical Contractor Work Completion and Test Report is a crucial step in certifying the completion of electrical installations. This guide provides clear, step-by-step instructions to ensure you accurately complete the form online.

Follow the steps to complete the form online.

1. Click ‘Get Form’ button to obtain the form and open it in the editor.
2. Begin by entering the details of the owner and the address of the electrical installation in the designated fields.
3. Provide the name of the electrical contractor, including the official address, license number, and validity period.
4. Fill out the name of the electrical supervisor, along with their official address, permit number, and validity as required.
5. Complete the same for the electrical wiremen, including their official address, permit number, and validity.
6. Detail the specifics of the electrical installation, including the types of equipment like generators, transformers, and the overall connected load.
7. Provide nameplate details for each piece of equipment, including make, specifications, and serial numbers. Note that a separate sheet may be required for multiple installations.
8. Detail the connected HT/LT loads across panels and circuits, specifying the total connected load of the plant.
9. Enter data pertaining to wiring and cabling, including sizes, numbers of runs, and lengths for different types of cables.
10. Provide an earthing schedule, including details about sizes of earth leads for grids, mats, and individual equipment.
11. Enter results for insulation tests, including dates of tests, names of testers used, and test results.
12. Document earth test results in a similar manner, ensuring you include the names and details of testers used.
13. List the officials authorized to operate and maintain the electrical installation, along with their qualifications.
14. Upon completion, verify all details for accuracy and sign the form as the electrical supervisor and installation owner.
15. The licensed electrical contractor must sign and seal the form, including their firm name and address, license number, and validity.
16. Finally, save changes, download, print, or share the completed form as necessary.

Complete your Electrical Contractor Work Completion and Test Report online to ensure compliance and facilitate inspection.