Get Tanco Autowrap Fault Finding

This guide provides step-by-step instructions for effectively filling out the Tanco Autowrap Fault Finding form online. By following these steps, users can ensure a comprehensive and accurate submission, streamlining their fault-finding process for autowrap machinery.

Follow the steps to complete the Tanco Autowrap Fault Finding form online.

1. Click the ‘Get Form’ button to obtain the form and open it in your digital editor.
2. Begin by reviewing the general checkpoints listed on the form. These include ensuring that the oil pressure from your tractor is 180 bar, the return flow of oil has a maximum counter pressure of 10 bar, and that enough electric power is supplied to all functions of the machine.
3. Next, proceed to fill in the specifics related to oil pressure. To check the oil pressure into the machine, apply a gauge to the oil pressure hose.
4. Fill out the section on oil amount, ensuring that the tractor delivers at least 15 liters/minute, with a recommendation of 25 liters/minute. Note the maximum allowed oil amount is 40 liters/minute.
5. Then, verify the return pressure of the system. Ensure that the maximum allowed return pressure is not exceeding 10 bar and recommend a 'free return' directly to the tank.
6. Check the electric power inputs. Confirm the battery voltage is high enough to ensure all functions operate correctly. If the voltage is below 9 volts, the valves may not function.
7. Proceed to describe the specific issues observed with the machine, selecting from the listed problems such as poor film wrapping or malfunctioning components.
8. Review the final recommendations, making notes on any identified faults or actions taken, then ensure all fields are accurately filled.
9. Finally, after verifying the information entered is correct, save your changes, download, or print the form if necessary, or share it via your preferred digital channels.

Start completing the Tanco Autowrap Fault Finding form online today.