Get Procedure Checklist Astm C 1064 Temperature Of Freshly - Dot State Fl

Filling out the Procedure Checklist ASTM C 1064 Temperature of Freshly Mixed Hydraulic-Cement Concrete is essential for ensuring accurate temperature measurements in concrete testing. This guide provides step-by-step instructions to help users complete the form confidently and efficiently.

Follow the steps to accurately fill out the procedure checklist.

1. Click the ‘Get Form’ button to obtain the form and open it in your chosen editor.
2. In the first section, place the Temperature Measuring Device (TMD) in the concrete so that the sensing portion is submerged at least 3 inches (75 mm). Be mindful to ensure the TMD is properly positioned.
3. Gently press the concrete around the TMD to prevent ambient air temperature from affecting your temperature reading. This step is crucial for obtaining an accurate measurement.
4. Leave the TMD in the concrete for a minimum of 2 minutes but no more than 5 minutes. This timeframe allows for the temperature reading to stabilize.
5. Read and record the temperature of the freshly mixed concrete to the nearest 1 °F [0.5 °C]. It is important not to remove the TMD from the concrete while recording the temperature.
6. Report the measured temperature of the freshly mixed concrete also to the nearest 1 °F [0.5 °C]. Ensure all data is accurately entered.
7. Fill in any additional required fields such as the date, technician's name, and other identifiers. This may include e-mail addresses for the technician and supervisor.
8. After you complete the form, review all entries for accuracy and completeness. Then, save your changes, and proceed to download, print, or share the completed form.

Start filling out your Procedure Checklist online to ensure accurate concrete temperature measurements.