Get Flagpole Installation Instructions

Filling out the Flagpole Installation Instructions form online is a straightforward process that ensures you complete your flag installation safely and correctly. This guide will walk you through each step, providing you with the necessary tools and materials to successfully install your flagpole.

Follow the steps to complete the installation instructions online:

1. Click ‘Get Form’ button to access the Flagpole Installation Instructions and open it in your preferred document editor.
2. Read the entire installation instructions thoroughly to understand the requirements and safety precautions.
3. Select a suitable location for your flagpole, ensuring that there are no utilities or power lines beneath the surface or overhead.
4. Dig a round hole with a diameter of 12 inches and a depth of 28 inches, adjusting the hole size if the soil is soft or sandy.
5. Add 4-6 inches of gravel at the bottom of the hole to ensure proper water drainage.
6. Insert the stop bolt through the pre-drilled hole in the ground sleeve, ensuring it is hand-tight only.
7. Push the ground sleeve into the gravel until it is at least 1 inch above ground level; avoid letting concrete seal it in place.
8. Mix the concrete according to the instructions provided by the manufacturer.
9. Use the red cap to cover the ground sleeve and carefully fill the hole with concrete, ensuring the sleeve remains undisturbed.
10. After 24 hours, remove the red cap and place your flagpole into the ground sleeve.

Complete your Flagpole Installation Instructions online to ensure a successful installation.