Get Cantilever Retaining Wall Design Spreadsheet

This guide provides a detailed overview of how to effectively complete the Cantilever Retaining Wall Design Spreadsheet online. Each section and field of the spreadsheet will be explained to ensure users can accurately input information and achieve the best results.

Follow the steps to fill out the form correctly.

1. Press the ‘Get Form’ button to access the spreadsheet and open it in your preferred online editor.
2. Start by entering the geometry details. Fill in fields such as the concrete stem height, stem thickness at the top and bottom, and footing thickness. Ensure the units (meters or centimeters) are selected correctly based on the context.
3. Input the backfill details. Enter the backfill height, backfill slope angle, and soil parameters including density and internal friction angle. This data will influence the calculation of active and passive earth pressures.
4. For seismic analysis, provide the horizontal and vertical seismic coefficients. This information will be essential if your design is subject to seismic considerations.
5. Fill in the applied loads section with the required uniform surcharge and vertical loads. Ensure that load eccentricities and wind load settings are also included.
6. Proceed to the shear key design inputs if applicable, noting the shear key depth and thickness. If no shear key is specified, ensure to indicate this accordingly.
7. Calculate and verify the overturning and sliding stability factors using the calculated forces and moments from previous sections. Validate these results for compliance with safety standards.
8. Finalize the spreadsheet by reviewing all information for accuracy. You can then choose to save your changes, download the document, or print it for your records.

Complete the Cantilever Retaining Wall Design Spreadsheet online to ensure accurate design and compliance with engineering standards.