Get A2-t342-15a-instructions-

This guide offers detailed instructions on how to successfully assemble the Anderson Rifles 80% lower receiver using the provided jig. Follow these steps to ensure safety and accuracy during the assembly process.

Follow the steps to complete your lower receiver assembly.

1. Review the assembly drawing included in the document to familiarize yourself with each component.
2. Gather all required components from the kit, including Fixture Plate #1, Fixture Plate #2, Fixture Drill Plate #3, two templates, and the necessary drill bits. Ensure you have the specified quantity for each item.
3. Assemble the fixture as illustrated in the assembly drawing, utilizing Fixture Drill Plate #3. Align and secure the plates and verify that everything is square for accurate machining.
4. Begin the drilling process by drilling each of the 38 holes using the provided 1/8" drill bit to a depth of .25" as outlined in the instructions, then remove Fixture Drill Plate #3.
5. Proceed to drill the specified holes (Step 2A and 2B), ensuring you follow the sequence and dimensions for each hole as detailed in the document. Recommended drill sizes are provided for optimal results.
6. Install Template #1 to guide in removing the scallops from the drilled areas. Use appropriate tools to achieve the required dimensions.
7. Install Template #2 and drill the necessary holes while ensuring the material is removed between the holes accurately, according to the specified depth.
8. Finish by drilling the specified holes in Fixture Plate #1, including the 5/32" for the hammer/trigger pin and the 3/8" for the safety selector.
9. Disassemble the fixture carefully and inspect your work for quality and safety before final assembly of the lower receiver.

Complete your document assembly online to ensure compliance and safety.