Get Pw1b

The Pw1b form, an essential addition to the Plan/Work Approval Application (PW1), is necessary for all new buildings and alterations involving plumbing work. This guide provides clear and supportive instructions for filling out the Pw1b form to ensure compliance and accuracy.

Follow the steps to complete the Pw1b form successfully.

1. Click the ‘Get Form’ button to obtain the Pw1b form and open it in your preferred editor.
2. Provide all requested location information in section 1. This information can typically be researched online for the specific property.
3. In section 2, check off the applicable work types that correspond with the PW1 form, and provide consistent cost information according to the PW3 form. Indicate sprinkler head counts and address any violations if necessary.
4. Complete section 3 by indicating the type of drainage system for both storm and sanitary discharge for all new building applications.
5. In section 4, check the appropriate box regarding sewer work if it involves SD1, SD2, SD3, or a site connection or septic tank system.
6. For section 5, check all applicable boxes for any components being capped, removed, replaced, or relocated. Provide descriptions in the designated spaces.
7. In section 6, confirm whether gas piping is involved by answering ‘yes’ or ‘no,’ and provide detailed information about all gas-fired equipment, meters, and usage.
8. For section 7, ensure that the applicant’s signatures, date, and seal are included, as required for all applications.
9. In section 8, fill out the equipment information. Indicate the presence of piping components with a “1” for each appropriate floor and specify the number of equipment and fixtures listed.
10. After completing all sections, make sure to save your changes, and you can then download, print, or share the form as needed.

Complete your Pw1b form online today to ensure your project is on track!