Get Hcd Codes And Standards

Filling out the Hcd Codes And Standards form is essential for ensuring compliance with electrical load regulations for manufactured homes. This guide aims to provide you with easy-to-follow steps to complete the form effectively and accurately.

Follow the steps to fill out the Hcd Codes And Standards form.

1. Click ‘Get Form’ button to obtain the form and open it in the editor.
2. Begin by filling out the existing home amps section. Calculate the wattage for lighting based on the length and width of the home. Multiply the total square footage by 3 watts.
3. Next, enter the number of 20-amp small appliance circuits (excluding laundry) and multiply this by 1,500 watts to determine the load from small appliances.
4. If there is a laundry circuit installed, include a minimum of 1,500 watts in this section.
5. Add the wattage from lighting, small appliances, and laundry to get the total wattage in the designated field.
6. For the first 3,000 watts, enter it at 100% within the specified line.
7. Multiply the remaining wattage over 3,000 by 35% and input this value into the corresponding field.
8. Add the results from the previous two calculations to identify the net computed load.
9. Subtract 3,000 from the total wattage from line D, then divide by 240 volts to find the loads in amps for part 1.
10. Complete the required appliances in Part 1 and Part 2, adding up any loads not previously included.
11. If you are de-amping a manufactured home unit, ensure you have the necessary permit from HCD and include any fees in your calculations.
12. Once filled, review all entries for accuracy, and utilize the options to save changes, download, print, or share the form as needed.

Start filling out your Hcd Codes And Standards form online today for compliance and efficiency.