Get Ladder Safety Handout

This guide provides a clear and structured approach to filling out the Ladder Safety Handout online. Follow the steps outlined below to ensure accurate and complete submission of your safety information.

Follow the steps to complete the Ladder Safety Handout online.

1. Click the ‘Get Form’ button to access the Ladder Safety Handout. This will allow you to open the form in your online document management interface.
2. Begin by selecting the appropriate ladder for your task. Ensure it suits the height of the working surface, keeping in mind that extension ladders should not be overextended and must extend 3 feet past the access point.
3. Inspect the ladder prior to using it. Look for any cracks in the side rails and rungs, ensure extension locks are functioning properly, and check for bent rungs or missing hardware like rivets or bolts.
4. When setting up the ladder, position it on a solid, level surface. If it’s in a traffic area, incorporate a barricade or guard to prevent accidental collisions.
5. Before climbing, verify that the area at the base of the ladder is clear of clutter, including tools. Ensure step ladders are fully opened with locked spreaders.
6. As you fill out the safety information regarding ladder use, include instructions on maintaining three-point contact while climbing, and avoiding reaching too far or standing on the top rung.
7. Finally, review the maximum weight rating for the ladder, ensuring to include the weight of any tools or equipment. Confirm that the ladder complies with ANSI and UL standards.
8. Once you have completed all sections of the form, save your changes and choose to download, print, or share the completed Ladder Safety Handout as needed.

Complete your Ladder Safety Handout online today for a safer working environment.