Get K3435b Datasheet

Lock Socket® snaps easily onto your phone charging block, locks in your phone charging cable, and then screws into any standard or Decora wall plate. That's right – no zip ties are required! Our proprietary solution secures iPhone standard, iPhone Pro 20V, iPad 12V, and Android charging blocks.

0:24 2:08 How To Secure An Electric Car Charging Cable - YouTube YouTube Start of suggested clip End of suggested clip Bay. If you don't have any objects to secure your charging cable to you can always pass it aroundMoreBay. If you don't have any objects to secure your charging cable to you can always pass it around the alloys of the nearest wheel. And again secure it with a padlock.

Lock Socket The idea is simple yet ingenious. The Lock Socket fits over both the charger and charging cable and screws to any standard wall plate using an Allen key. Once in place, the charger is secured to the outlet, and the charging cable is secured to the charger.

Lock Socket® snaps easily onto your phone charging block, locks in your phone charging cable, and then screws into any standard or Decora wall plate. That's right – no zip ties are required! Our proprietary solution secures iPhone standard, iPhone Pro 20V, iPad 12V, and Android charging blocks.

How to Keep Your Charging Cables from Breaking Use a spring from a pen to protect the end of the cable. For smaller cables, try using a spring from a pen to prevent the charging end from breaking. ... Weave par around the end of the cable. ... Wrap cables correctly. ... Don't stretch the cable.

A socketed charger with a cable lock feature, such as the Easee One, is a great option to prevent theft of your cable, as you can lock it in place when using it but remove and safely store the cable when it's not in use.

It is safe. The voltage is very low and as long as there's covering over the wires, it's unlikely to short out or cause any harm. Can I "repair" a phone charger with duct tape or will this just create a fire hazard? The inside of the cord is already exposed.

Check that there is at least 9.5 mm between the edge of the pins and the edge of the plug/charger. If the distance between the edge of the pins and the edge of the plug is less than 9.5 mm, there is a risk of electric shock when inserting and withdrawing the charger from a socket.