Get Chipntrac Guide To Setting Up And Using This Gps Tracker

This guide provides a detailed, user-friendly approach to filling out the CHIPnTRAC Guide for setting up and using your GPS tracker. Follow these steps to ensure a smooth and efficient setup.

Follow the steps to complete the setup process effectively.

1. Click ‘Get Form’ button to obtain the document and access it online for editing.
2. Begin by making a note of your mobile phone number and the number on the SIM card. Save the SIM card number as a contact labeled 'A Tracker' for easy access.
3. Before powering on the tracker, take it outside to ensure it has a clear GPS connection with the satellites.
4. Carefully remove the back cover of the tracker by lifting the clip on the underside without damaging it.
5. Insert the SIM card, ensuring it is properly seated and secured in place.
6. Insert a fully charged battery into the tracker, close the back cover, and secure the clip. The small green indicator LED light should be on with single flashes.
7. Send the text message 'begin123456' from your mobile phone to initialize the tracker. Wait for a confirmation reply: 'begin ok!'
8. Authorize your mobile phone as the master number by sending the command 'admin123456 SPACE yourphonenumber', replacing 'yourphonenumber' with your actual phone number.
9. Confirm the setup by checking for the response 'admin ok!' and make any additional authorizations as needed.
10. After setup completion, you can manage settings such as setting alerts, sleep mode, or viewing location by sending the appropriate text commands.
11. When satisfied with your configuration, make sure to save changes, and you may choose to download, print, or share the guide as necessary.

Start completing your document online to make the most of your CHIPnTRAC GPS Tracker.