Get Welder Welding Operator Or Tack Welder Qualification - Pubs Aws

Filling out the Welder Welding Operator Or Tack Welder Qualification - Pubs Aws form online can seem daunting, but with a clear understanding of each section, it becomes manageable. This guide provides detailed instructions tailored to your needs, ensuring you complete the form accurately and efficiently.

Follow the steps to complete the qualification form accurately.

1. Press the ‘Get Form’ button to access the document and open it in your preferred editing interface.
2. Begin by entering the type of welder in the designated field. This includes specifying whether you are a welder, welding operator, or tack welder.
3. Fill in your full name in the next section, followed by your identification number. Ensure that these details are accurate as they will be used for verification.
4. Input the welding procedure specification number, including the revision number and the date. This information is crucial for referencing the applicable welding standards.
5. Proceed to the qualification range variables. These include details of the welding process/type, electrodes used, current/polarity, welding position, weld progression, and whether backing was used. Complete each section based on the actual values observed during your welding qualification.
6. Next, provide specifics about the base metal, including its thickness for both plates and pipes, along with the groove and fillet specifications.
7. Fill in the details concerning the filler metal, including specification numbers and classifications as listed in the guidelines.
8. Indicate the gas or flux type used in the welding process and provide any additional relevant information applicable to your qualifications.
9. Move on to the visual inspection results section and mark whether the inspection was acceptable, using 'YES' or 'NO'.
10. Document the guided bend test results by noting the type and outcome of the test conducted.
11. For the fillet test results, record the appearance, size, root penetration, and macroetch details, including a description of any defects observed.
12. Fill in the inspector's details, the organization name, and the test number along with the respective testing date.
13. Complete the radiographic test results section, including film identification numbers, results, and remarks, if any.
14. Ensure that the authorized individual certifies the record by providing their signature, along with the date and the manufacturer or contractor's name.
15. After double-checking all the information for accuracy, save your changes, download a copy, print, or share the completed form as required.

Start filling out the qualification form online today to ensure your welding credentials are properly documented.