Get Optalign

Filling out the Optalign form is a crucial step for accurate alignment of horizontal machines. This guide provides clear and comprehensive instructions for users to effectively complete the form online.

Follow the steps to successfully fill out your Optalign form.

1. Click ‘Get Form’ button to obtain the Optalign form and open it in your preferred online editor.
2. Begin by entering the file number and machine number along with the type and name of the operator in the designated fields.
3. Record the date of measurement in the specified section.
4. Mount the Optalign device and ensure it is powered on. Adjust the prism until the laser beam aligns with the center of the prism cap's crosshair.
5. Remove the cap of the prism and adjust it until the coordinates are approximately zero.
6. Measure the relevant dimensions, starting with the distance from the laser to the prism, then from the laser to the center of the coupling, and other specified measurements. Always press ENT after entering values.
7. Fill in the coupling results and foot corrections as prompted in the respective fields.
8. Review all entered information for accuracy. Ensure any required adjustments or shim changes are recorded appropriately.
9. Once all fields are completed, save your changes. You can download, print, or share the completed form as needed.

Complete your forms online for efficient document management.