School District: LEA #: Attn: Exp. Date: Address: Lab Facility: CA Lab Doc. #: Project Name: Weight Retained (grams) Sieve size 2.5 Lab Job #: Report Date: By: TESTING INFORMATION - Structure: Location.
Open form follow the instructions
Easily sign the form with your finger
Send filled & signed form or save
How to fill out the DSA-202: Sieve Analysis Test Report - Documents Dgs Ca online
The DSA-202: Sieve Analysis Test Report is a crucial document utilized in various projects to ensure the quality of materials used in construction. This guide provides clear instructions on how to accurately complete this form online, ensuring compliance with applicable standards.
Follow the steps to effectively complete the DSA-202 form online.
- Click ‘Get Form’ button to retrieve the DSA-202 form and open it for editing.
- Fill in the school district name and Local Education Agency (LEA) number at the top of the form.
- Provide the name and contact information of the person to whom the report is addressed.
- Enter the address of the lab facility conducting the sieve analysis.
- Record the lab document number and the project name associated with the testing.
- Input the lab job number and the date of the report.
- In the testing information section, indicate the location in the structure from which the sample was taken.
- Complete the DSA file number and application number, ensuring all numbers are accurate.
- Document the sample date and the weights of the sample before and after washing.
- Calculate the total loss after sieving, ensuring it is less than 0.3%.
- Fill out the cumulative weight retained for each sieve size, along with the percentage retained and percentage passing for each listed sieve.
- Specify the applicable ASTM test methods related to the analysis.
- Include any remarks if necessary.
- Check whether the material was sampled and tested in accordance with DSA approved documents.
- Indicate if the material tested met the requirements as stated.
- Sign and date the report, and print your name and title.
- Review all entries for accuracy and completeness before saving the changes, downloading, printing, or sharing the form.
Complete your documents online to ensure accuracy and compliance.
Experience a faster way to fill out and sign forms on the web. Access the most extensive library of templates available.
Related content
DGS DSA 202 (revised 02/16/11; updated 12/05/19. Page 1 of 1. DIVISION ... STATE OF...
Jun 18, 2019 — Certificates may be recent or previous test results on material or...
... ANI Automatic Number Identification ANOVA Analysis of Variance Procedure ANS ... Forum...
Get answers to your most pressing questions about US Legal Forms API.
What is the objective of grain size analysis?
Grain size analysis is a typical laboratory test conducted in the soil mechanics field. The purpose of the analysis is to derive the particle size distribution of soils. The analysis is conducted via two techniques. Sieve Grain Size Analysis is capable of determining the particles' size ranging from 0.075 mm to 100 mm.
What is the purpose of the sieve analysis of soil?
Sieve analysis determines the particle size distribution of a given soil sample and hence helps in easy identification of a soil's mechanical properties. These mechanical properties determine whether a given soil can support the proposed engineering structure.
What is the aim of sieving?
This method of separation of particles from a mixture based on the difference in size of particles is known as sieving. It uses sieve plates for separation of coarse particles from finer particles. Sieve plates have meshed or perforated bottoms which allow only particles of a specific size to pass through it.
What is sieve analysis lab report?
This test is performed to determine the percentage of different grain sizes contained within a soil. The mechanical or sieve analysis is performed to determine the distribution of the coarser, larger-sized particles, and the hydrometer method is used to determine the distribution of the finer particles.
What is the objective of sieve analysis lab report?
The sieve analysis determines the gradation (the distribution of aggregate particles, by size, within a given sample) in order to determine compliance with design, production control requirements, and verification specifications.
What is the discussion for sieve analysis?
Sieve analysis is a method that is used to determine the grain size distribution of soils that are greater than 0.075 mm in diameter. It is usually performed for sand and gravel but cannot be used as the sole method for determining the grain size distribution of finer soil.
What is the discussion of dry sieving?
Dry, or traditional, sieving is used to determine the particle size of dry, free-flowing material. These sieves are used by shaking or vibrating the sieve which allows the particles to seek the openings in the wire mesh. The particles are able to separate on their own.
What is particle size analysis by sieve discussion?
Sieve analysis is used to obtain the particle size distribution of a solid material by determining the amount of powder retained on a series of sieves with different sized apertures. A sample is added to the top of a nest of sieves arranged in decreasing size from top to bottom.
Use professional pre-built templates to fill in and sign documents online faster. Get access to thousands of forms.
If you believe that this page should be taken down, please follow our DMCA take down process here.