Get Installing Sky Mexico With Super Buddy Satellite Meter - Tequipment

This guide provides a clear and professional overview of how to fill out the Installing Sky Mexico With Super Buddy Satellite Meter - Tequipment form online. Follow the steps outlined to ensure a smooth and accurate completion of the document.

Follow the steps to effectively complete your form online.

1. Click the ‘Get Form’ button to obtain the form and open it in the designated editor.
2. Begin by connecting the LNB to the top port (SIGNAL IN) of the Super Buddy meter using a coax cable. This is crucial for the meter to function correctly.
3. Proceed to set up the meter. Press the SYST System soft-key located in the top left corner of the LCD screen. This will allow you to enter the System Setup menu.
4. Select the appropriate geographic region from the REGIONS menu. Ensure that you select your specific location for accurate signal settings.
5. Next, navigate to the SERVICE section and choose 'Other Providers'. This should align the meter with the right service type.
6. For SYSTEM, select 'Sky Mexico' as your system option.
7. The LNB MODEL can be left as N/A, and the SWITCH TYPE should default to none. Press the up/down arrow keys to adjust settings and confirm selections with the Enter key.
8. To point the antenna, ensure the mast is installed plumb, preset the vertical angle, and align it grossly to the azimuth. Utilizing the ZIP (zip code) look-up feature will give you approximate angle settings based on your location.
9. Select the desired satellite by using the left/right arrow keys. You will want to choose the 58W Intelsat 9 satellite, displayed in the upper left corner of the LCD screen.
10. Press the ZIP zip code soft-key, input your local zip code or latitude/longitude coordinates using the numeric keypad, and press ENTER. Approximate antenna settings will be displayed. When done, press the EXIT soft-key to return to the Run screen.
11. Activate the LNB by pressing the LNB soft-key found on the middle right side of the LCD screen. This activation is necessary for optimal functionality.
12. Adjust the antenna's azimuth and elevation while monitoring the maximum signal level (left bar graph) and signal quality (right bar graph). Ensure 'LOCK' status is achieved for a stable connection.
13. Fine-tune the LNBF by adjusting the polarity offset to achieve the best signal level and quality.
14. Press the ID soft-key to confirm satellite verification. If 'ID VERIFIED' appears, this indicates proper orientation towards the satellite.
15. In case 'ID FAILED' is shown, press the SCAN soft-key, which will direct the Super Buddy to detect which satellite you are aligned with.
16. Optionally, you can use the Up/Down arrow keys to browse through other transponders, checking for the correct signal levels and quality, ensuring all requirements are met.
17. Once all information is accurately filled out, save changes, and consider downloading, printing, or sharing the form as needed for your records.

Complete the Installing Sky Mexico With Super Buddy Satellite Meter - Teequipment form online today for effective satellite installation.