Get Uv Light Checklist

This guide provides clear instructions on how to complete the Uv Light Checklist online for the disinfection unit utilizing ultraviolet light. Whether you are unfamiliar with the process or have completed similar forms before, this user-friendly guide will assist you in effectively filling out each section of the form.

Follow the steps to complete the Uv Light Checklist online

1. Press the ‘Get Form’ button to access the Uv Light Checklist, opening it in an editable form.
2. Begin by filling out the service details, including the date, time, company name, date of last service, and date of last inspection in the designated fields.
3. Review the power supply section—indicate the dosing method, fill in the manufacturer and model number of the unit, and answer whether power is supplied to the unit and if the UV lamp is operational.
4. Next, ensure the electrical system is free of corrosion or damage. Confirm if the ballast was replaced during the visit and record the last replacement date.
5. In the UV controls section, indicate if the unit is equipped with a lamp intensity sensor and record the intensity reading if applicable. Include information regarding the alarm's presence and proper operation.
6. Assess the contact chamber, lamp, and sleeve conditions. Note any evidence of damage or leakage, confirm if the contact chamber is cleaned, and specify the type of protective sleeve used.
7. Check if the protective sleeve is free of buildup, was cleaned, replaced during the visit, and record the date of its last replacement. Also, confirm if the UV lamp was replaced and its last replacement date.
8. Document influent characteristics, including turbidity and flow rate, and highlight any wastewater characteristics that could affect treatment.
9. Assess the control panel for proper operation, watertight enclosure, and alarm test switch functionality. Indicate the control switch setting used at the time of inspection.
10. Review the housing unit conditions, noting any leaks, cracks, and excessive dust. Determine if the manufacturer's required maintenance was performed and if lab samples were collected for monitoring.
11. Finally, enter any notes or comments on the form and determine whether the overall conditions were acceptable or unacceptable.
12. Once all sections are complete, save your changes, and download, print, or share the Uv Light Checklist as needed.

Start completing your Uv Light Checklist online today to ensure proper disinfection unit operations.