Get Fairmont Homes Installation Guide For A Radco Mobile Home

Additions Cannot be Attached to a Mobile or Manufactured Home. First and foremost, additions should never be attached to a manufactured home at all. The addition must be a completely separate unit that is simply butted up to the home and 'sealed.

Base pads ensure proper water drainage, keep humidity under the home down, and help keep the foundation from shifting. ... The caliche is rolled and compacted into a level surface of about 4 to 6 inches in height and 1 foot larger on each side than the home to be placed there.

In the United States, the NADA Manufactured Housing Appraisal Guide is the blue book used to determine the value of mobile homes. Go to your local library and see if there is a copy. Look in the book for your type of manufactured home, and then follow the step-by-step guide for calculating the retail book value.

When a manufactured home is installed very close to ground level, making it look more like a site-built home, it has a pit set foundation. Because access to the bottom structure of the mobile home is necessary for maintenance and ventilation, a shallow pit must be dug under the footprint of the home.

Depending on the distance to materials, contractors in the area, and elevation needs, caliche base pads can cost from $2,500 to $4,500. The base pad requirements change if the loan option being pursued is a government loan FHA or VA.

Order a land survey. Before commencing any site preparation work, it's important to have a site inspection done. ... Apply for the permits necessary. ... Choose the location for your home. ... Build the foundation well in advance. ... Bring in the utilities you need.

Non-reinforced concrete footings placed beneath piers must be a minimum of four-inches thick and may not extend beyond the piers by a distance more than their thickness.

Go inside and walk to the approximate area where you saw the cable enter the underside of the mobile home. Look for the junction box to be located 3 to 5 feet above the floor level. Search cabinet spaces, wall panels, and similar areas until you find the junction box.