Get Silicon Nanowires Tutorial - Quantumwise

This guide provides a comprehensive overview of the steps needed to effectively fill out the Silicon Nanowires Tutorial - QuantumWise online. Whether you are new to the subject or have some experience, this tutorial will walk you through the process in a clear and organized manner.

Follow the steps to successfully complete the tutorial.

1. Click ‘Get Form’ button to obtain the form and open it in your preferred editor.
2. Begin with the introductory section of the document, where you'll find an overview and purpose of the tutorial. Familiarize yourself with the software requirements and initial setup instructions.
3. Proceed to the first chapter, which deals with the bandstructure of the Si (100) nanowire. Follow instructions to set up the geometry using the graphical interface. Ensure to properly define the H-passivation of the structure.
4. Define and run the calculations as instructed. This includes adding a new calculator for optimization and analysis, making sure to select appropriate parameters such as k-point sampling and exchange-correlation potentials.
5. Analyze the results of your calculations by locating the output files generated. Utilize the provided bandstructure analysis tools to interpret the results and visualize data.
6. For the FET simulation in the third chapter, repeat the process while setting up the device geometry, defining the gate voltage, and adding the relevant calculations for the transmission spectrum.
7. Adjust the parameters for doping the nanowire as specified, then run the final calculations to get the output file ready.
8. Save your changes and once you have completed all steps, you can download, print, or share the completed form.

Explore the Silicon Nanowires Tutorial - QuantumWise online to enhance your understanding and capabilities in nanowire simulations.