Get Absa Ab 40

The Absa Ab 40 form is essential for documenting repairs and alterations to pressure equipment as mandated by Alberta's Safety Codes Act. This guide provides detailed instructions for completing the form online, ensuring that all required information is accurately submitted.

Follow the steps to fill out the Absa Ab 40 form correctly.

1. Press the ‘Get Form’ button to access the Absa Ab 40 form and open it in the available digital interface.
2. Begin by entering the Alberta identification number (A#) assigned by the ABSA Safety Codes Officer (SCO).
3. Provide the owner equipment number, which is the vessel identification number assigned by the owner.
4. Enter the repair organization’s job number to track the specific repair or alteration.
5. Select the appropriate box to indicate whether this form is for a partial or final repair/alteration.
6. Input the name and address of the repair organization, including their Alberta Quality Program Certificate of Authorization number and its expiry date.
7. Fill in the name and address of the owner of the boiler or vessel, indicating where the item is installed.
8. List the item name as used by the owner, along with the Canadian Registration Number (CRN), the manufacturer name, and the serial number.
9. Document the original design conditions, including the maximum allowable working pressure (MAWP), temperature, and minimum design metal temperature (MDMT).
10. State the new design conditions. If they have not changed, repeat the information from the original design conditions.
11. Describe the defect in detail, including its location and type of damage.
12. Indicate the original code used for the manufacturing of the item.
13. Document the current code of construction applicable to the work performed.
14. Provide an exact scope of work, detailing the repair and alteration methods used; attach any necessary supporting documents.
15. State the minimum preheat temperature, including the holding time and temperature if post-weld heat treatment is required.
16. Specify the types of non-destructive examinations (NDE) conducted and their extent.
17. Document the pressure test details, including the type of tests performed and their respective pressures.
18. List all pressure-retaining materials used in the repair, including specifications and measurements.
19. Identify the welding procedure used, including relevant Alberta Registration and ABSA welding specifications.
20. Indicate any welded replacement parts related to the report.
21. Complete the section identifying responsibilities of the owner for ensuring compliance.
22. Provide any additional remarks that are pertinent to the repair and/or alteration.
23. Fill out the Certificate of Compliance section with relevant information about the repair organization and its representatives.
24. Enter the completion date of the repair/alteration.
25. Complete the Certificate of Inspection with details of the inspector and their findings.

Complete your documents online now for a more efficient filing process.