Get Form # 82249 - Rough Country

Filling out Form # 82249 - Rough Country is essential for the proper installation of your product. This guide will provide you with clear, step-by-step instructions to ensure that you complete the form accurately and efficiently.

Follow the steps to complete Form # 82249 - Rough Country online.

1. Click ‘Get Form’ button to access the form and open it in your preferred editor.
2. Review the installation instructions carefully. Ensure all surfaces are clean and dry before proceeding.
3. Position the wheels in a straight forward direction to prepare for installation.
4. Place axle bracket 'A' on the bottom of the axle, centered between the two expanded parts. Install the u-bolts using lock washers and nuts, but do not tighten at this stage.
5. Attach the mounting pin kits to the rod end of the cylinder as illustrated in the guide.
6. Loosely attach stabilizer bracket 'B' to the tie rod on both the passenger and driver sides using the u-bolts and flange lock nuts.
7. Connect the rod end of the cylinders to axle bracket 'A' using lock washers and nuts.
8. Attach the barrel end of each cylinder to tie rod brackets 'B' by following the bushing stack up instructions provided.
9. Extend the cylinders 4 ½ inches and tighten the tie rod brackets, ensuring the visible piston length is 4 ½ inches. Securely tighten all nuts on u-bolts.
10. Turn the wheels fully to the right and left to check for any interference and ensure the wheel stops are contacted. Make adjustments to tie rod brackets as necessary.
11. Recheck all nuts and fasteners before concluding the installation process.
12. Once you have entered all required information and completed the necessary steps, save your changes, download, print, or share the form as needed.

Start filling out Form # 82249 - Rough Country online now to ensure a smooth installation process.