Get Mechanical Ventilation Checklist

Filling out the Mechanical Ventilation Checklist online is an essential task for ensuring proper ventilation in dwellings. This guide will provide you with a clear, step-by-step approach to completing the checklist effectively, ensuring compliance with relevant codes and standards.

Follow the steps to successfully complete the checklist online:

1. Click the ‘Get Form’ button to access the Mechanical Ventilation Checklist and open it in your preferred editor.
2. Begin by entering the civic address and permit number at the top of the form. Ensure that this information is accurate as it is critical for records.
3. Proceed to state the number of bedrooms in the dwelling as well as the total interior volume of the dwelling in cubic feet (ft3). This is necessary for calculating ventilation requirements.
4. For the principal fan section, note the required exhaust rate by referring to Table 9.32.3.3.A based on the number of bedrooms listed. Record the established minimum and maximum rates.
5. Fill out the information for the principal fan regarding its make, model, and sone rating. Record the specifications clearly to ensure compliance.
6. Document the size of the duct for the principal fan, choosing between smooth or flex duct types based on Table 9.32.3.9.
7. Enter the details for kitchen and bathroom exhaust fans, including the make and model of each fan, their respective CFM ratings, and the required duct diameters.
8. Indicate whether NAFFVA or radon gas is present in the unit. If applicable, follow through the specific steps designated for those conditions.
9. Complete any necessary sections regarding makeup air requirements if appliances exceed the determined thresholds, following calculations as outlined.
10. Finally, review the entire form for accuracy. Once satisfied, you can save changes, download, print, or share the completed checklist as needed.

Complete your Mechanical Ventilation Checklist online today!