Get Sprinkler System Acceptance Form

The Sprinkler System Acceptance Form is a crucial document that ensures compliance with safety standards for residential sprinkler systems. This guide provides detailed instructions on how to complete the form online, ensuring a smooth submission process.

Follow the steps to fill out the Sprinkler System Acceptance Form online.

1. Press the ‘Get Form’ button to access the Sprinkler System Acceptance Form and load it into your preferred editor.
2. Begin filling in the Warrington Township Permit number at the top of the form.
3. Indicate the date of the inspection to provide context for the assessment.
4. Enter the name of the inspection company conducting the test.
5. Provide the property owner's full name to identify the individual responsible.
6. Fill in the company registration number for the inspection company.
7. Include the complete property address where the sprinkler system is installed.
8. Document the inspector's name for accountability in the inspection process.
9. List the owner's phone number to facilitate any necessary communication.
10. Indicate who certified the inspection by marking 'Yes', 'No', or 'N/A' in the provided section.
11. For recalled heads, list any defective components as necessary, and review options with the owner.
12. Conduct a visual inspection for any obstructed or painted sprinkler heads which need replacement.
13. Ensure all valves are open for a proper acceptance test.
14. Check the water gauge PSI level, ensuring it meets the required 300 PSI.
15. Confirm that all rooms are covered and sprinklers are properly spaced throughout.
16. Verify the location of spare heads and ensure they are stored appropriately.
17. Verify the operational status of the flow switch by flowing water, and notify the alarm monitoring company.
18. Check the noise level of the alarm notification device, ensuring it is audible in all areas.
19. Ensure the backflow preventer is operational and certified by a qualified technician.
20. Confirm the backflow preventer is correctly positioned and has been inspected.
21. If applicable, note the water level of the tank and check the pump's operational status.
22. Conduct a specific gravity test to verify anti-freeze and RPZ installation.
23. Document the percentage of anti-freeze tested in the appropriate section.
24. Have the technician sign the form to confirm all checks are completed.
25. Review any 'No' check-offs that may require additional explanations in the notes section.
26. Complete the notes section with any pertinent details or observations.
27. Once all sections are completed, save your changes, and choose to download, print, or share the form as needed.

Complete your Sprinkler System Acceptance Form online today to ensure compliance and safety.