Get 2010 Matrix Pre-delivery Service Check Sheet - Toyota Parts And Bb

Filling out the 2010 Matrix Pre-delivery Service Check Sheet is an essential process in ensuring the quality and safety of vehicles before delivery. This guide provides step-by-step instructions to assist users in completing the form accurately and efficiently.

Follow the steps to fill out the form correctly.

1. Click ‘Get Form’ button to access the document and open it in your preferred editor.
2. Begin by completing the initial section, where you will apply the parking brake and turn the ignition 'ON'. Ensure to place the gear selector in reverse and activate the lights and rear defogger. Next, unlock the doors and release the fuel door.
3. Proceed to examine the disc brake anti-rust covers and ensure that you remove any anti-corrosion wheel film if applicable.
4. Check the functionality of the dome, courtesy, map, and sun visor lights. Document any issues in the designated field.
5. Verify warning and indicator lights, gauges, and the horn. Ensure all are operating as intended.
6. Inspect the windshield wipers and washers for proper operation; include notes if any repairs are needed.
7. Check the operation of headlights, instrument lights, turn signals, emergency flashers, and brake lights, documenting everything thoroughly.
8. Evaluate inside and outside rear view mirror adjustments, checking for ease of use.
9. Confirm that the cigarette lighter and power outlets function properly.
10. For vehicles with sunroofs, check their operation and record your findings.
11. Install the antenna, and then check the audio system, ensuring to set the clock appropriately.
12. For the road test, drive the vehicle on various road conditions to assess handling and identify any unusual noises or performance issues. Record odometer readings before and after the test.
13. Carry out a walkaround inspection starting from the left front door, checking window and door lock operations, seat belts, and overall interior condition. Ensure all lights and trunk contents are in good condition.
14. Under the hood, check fluid levels (engine oil, brake, clutch, power steering, and coolant) and battery charge, and inspect for leaks.
15. Inspect tires for any defects or damage and initialize the Tire Pressure Warning System.
16. Complete the final inspection by removing any protective covers and labeling, ensuring the vehicle is clean and all parts are properly installed.
17. Conclude by adding the technician’s signature and service manager’s signature along with their printed names and date.
18. Once completed, save any changes made to the form. Following this, you can choose to download, print, or share the completed document.

Begin filling out documents online today to ensure compliance and quality.