Get Form Gw-2 - The Virginia Department Of Environmental Quality ... - Deq Virginia

Filling out the Form GW-2 is a critical process for reporting well completion data to the Virginia Department of Environmental Quality. This guide provides clear and detailed instructions for each section of the form, ensuring it is filled out correctly and comprehensively.

Follow the steps to fill out the Form GW-2 accurately.

1. Press the ‘Get Form’ button to obtain the form and open it in the editor.
2. Begin with the DEQ Permit section by entering the latitude and longitude coordinates, datum, topographic map number, elevation, and other related geological information. Ensure accuracy, as these details are pivotal for report integrity.
3. Complete the County Permit section by entering the county or city name, the coordinates, and the DEQ Well number, along with the USGS local number, ensuring all entries are correct.
4. Provide owner information including the name, well designation or number, address, and phone number. Similarly, fill out the drilling contractor's details in the corresponding section.
5. In the Certification of inspecting official section, indicate whether the well meets code or law requirements, and remember to sign and date the section.
6. Fill out the WELL LOCATION section, providing precise distance and direction details from specified landmarks to locate the well accurately.
7. In the WELL DATA section, specify the type of well data, including total depth, hole size, casing size and material, screen sizes, gravel pack details, and grout information.
8. Provide water data in the designated area, including water temperature, static water level, stabilized measured pumping level and yield, and water quality comments.
9. In the USE DATA section, select all applicable types of use for the well along with the type of facility where the water will be utilized.
10. Complete the PUMP DATA section, including type and rated horsepower of the pump, as well as intake depth and capacity.
11. In the WELLHEAD section, describe the type of well seal, any pressure tank details, and include information on sample taps and valves.
12. If applicable, fill out the DISINFECTION, ABANDONMENT, and other sections, ensuring that all boxes are accurately checked and supplemented with required information.
13. Finally, certify the accuracy of the information provided, sign the form, and include your license number and the date before saving the changes, downloading, printing, or sharing the form.

Complete your documents online today for a hassle-free experience!