Get Guide For Completing Form Ab-96 - Absa - Absa

Completing Form AB-96 accurately is essential for documenting the design and construction of pressure piping systems. This guide provides detailed, step-by-step instructions to ensure you effectively fill out the form online.

Follow the steps to complete the form efficiently.

1. Press the ‘Get Form’ button to access the form and open it in your digital environment.
2. Enter the name and physical or mailing address of the owner of the pressure piping system in the designated fields.
3. Describe the type of plant where the pressure piping system will be installed, such as a chemical plant, refinery, or power plant.
4. Provide the complete plant location or the Legal Subdivision and the physical street address.
5. If the plant has a Canadian Registration Number, provide it. If it's new and unregistered, leave this section blank.
6. Input the tentative start and completion dates for construction, or state 'To Be Determined' if actual dates are not yet available.
7. Record the name of the company responsible for the design of the pressure piping system, along with any reference or job numbers.
8. Include the APEGGA Permit to Practice Number for the engineering company that is designing the system.
9. List the prime contractor's name and complete address, including reference or job number, or state 'To Be Determined' if the contractor is not yet awarded.
10. Select the applicable code of construction and indicate the correct edition and addenda year.
11. List all documents and drawings associated with the system design, if necessary, using supplemental sheets.
12. Provide the name of the registered Professional Engineer along with their seal and signature.
13. Confirm the suitability of the fittings used in the system and mark whether they are registered or pending with ABSA.
14. Specify the type of overpressure protection system, selecting all that apply, and provide the corresponding document numbers.
15. Detail the non-destructive examination methods planned for use in the project.
16. Indicate whether an alternate testing procedure is submitted for registration.
17. Provide the prime contractor’s Alberta quality control program registration number.
18. Include any general remarks relevant to your application.
19. Sign and date the document, clearly printing your name and providing your company name.
20. Remember that the section labeled 'FOR ABSA USE ONLY' must remain blank.
21. Once completed, you can save changes, download, print, or share the form as needed.

Complete your Form AB-96 online to ensure your pressure piping system is compliant and documented.