Get Atc 20 Rapid Evaluation Safety Assessment Form

Filling out the Atc 20 Rapid Evaluation Safety Assessment Form online is an essential process for assessing building safety after an incident. This guide will provide you with clear, step-by-step instructions to complete the form accurately and efficiently.

Follow the steps to complete the assessment form online:

1. Press the ‘Get Form’ button to access the Atc 20 Rapid Evaluation Safety Assessment Form and open it in your preferred editor.
2. Begin with the inspection section by entering your inspector ID, the date and time of the inspection, your affiliation, and areas that were inspected.
3. Next, provide a building description, selecting either 'Exterior only' or 'Exterior and interior.' Include the type of construction by specifying whether it is wood frame, steel frame, tilt-up concrete, concrete frame, concrete shear wall, unreinforced masonry, reinforced masonry, or other.
4. Fill out the building name and address accurately. Include the building contact's phone number, number of stories above ground and below ground.
5. Move on to the primary occupancy section, indicating the type of building, such as dwelling, other residential, public assembly, emergency services, commercial, offices, industrial, government, historic, or school.
6. Specify the approximate footprint area in square feet, the total number of residential units, and the number of residential units that are not habitable.
7. In the evaluation section, investigate the building conditions and check the appropriate box under the columns for minor/none, moderate, or severe.
8. Assess the estimated building damage by checking the respective boxes that correspond to the observed conditions, including types of damage or hazards as applicable.
9. For comments, provide any relevant observations or details regarding the conditions assessed.
10. Proceed to the posting section, selecting the appropriate posting options based on your evaluation, and record any use and entry restrictions as noted on the placard.
11. Finally, check boxes for any further actions needed and provide any recommendations or comments regarding structural and geotechnical evaluations.
12. Review the form for any errors, and once satisfied, save your changes, download, print, or share the completed form as required.

Complete the Atc 20 Rapid Evaluation Safety Assessment Form online today to ensure building safety and compliance.