Get Provision C.3. Data Form - Santa Clara Valley Urban Runoff ...

The Provision C.3. Data Form is a crucial document for projects that create or replace impervious surfaces, ensuring compliance with stormwater management requirements. This guide provides a step-by-step approach to filling out the form online in an efficient and user-friendly manner.

Follow the steps to complete the form accurately and effectively.

1. Press the ‘Get Form’ button to retrieve the document and open it in your preferred editor. This will enable you to begin entering the necessary information efficiently.
2. Begin with Section 1, titled Project Information. Fill in the details including the Project Name, APN Number, Project Address, Cross Streets, Applicant/Developer Name, and the Project Phase.
3. In the Project Type section, check all applicable boxes that reflect the nature of your project, such as New Development, Redevelopment, Residential, Commercial, etc.
4. Provide a clear Project Description, detailing the scope and purpose of the project. Describe any notable elements that can help in understanding its impact on stormwater management.
5. Move to Section 2, Project Size. Enter details regarding the Total Site Area and Total Site Area Disturbed in acres, and provide existing and proposed area measurements in square feet for impervious surfaces.
6. Complete the Total Impervious Area calculations, including Roof, Parking, Sidewalks, and Streets, as well as the Total Pervious Area for landscaping and other surfaces.
7. Proceed to Section 3 to evaluate State Construction General Permit Applicability by answering whether the area disturbed equals one acre or more.
8. Skip to Section 4 to assess MRP Provision C.3 Applicability by deciding whether the impervious area created or replaced meets the required thresholds.
9. In Section 5, evaluate Hydromodification Management Applicability by determining if the impervious surface created is equal to or greater than one acre and whether the location is applicable.
10. Section 6 requires you to select specific stormwater control measures. Check the relevant boxes for Site Design Measures, Source Control Measures, and Treatment Systems.
11. In Section 7, document Treatment System Sizing by providing the hydraulic sizing criteria used and the calculated design flow or volume.
12. Confirm in Section 8 whether the treatment system design was reviewed by a qualified third-party professional by selecting Yes or No.
13. Finally, provide the Operation & Maintenance Information, including the Property Owner’s Name, Responsible Party details, and any mechanisms for assuring O&M responsibilities.
14. Once all sections are completed, ensure to save changes, download the form for your records, and print or share as needed.

Complete your Provision C.3. Data Form online today to ensure your project complies with stormwater management requirements.