Get Scania Coolant Concentrate

Refilling coolant fluid is a simple task with Scania Coolant Concentrate. Start by ensuring your vehicle is parked on a level surface and allow the engine to cool down. Open the radiator cap and pour the appropriate mixture of coolant concentrate and water into the system until it’s filled to the recommended level. Check for any leaks after refilling to ensure your system is functioning efficiently.

When mixing Scania Coolant Concentrate, a common ratio is 50% concentrate to 50% water. However, this may vary based on your climate conditions. In colder areas, you might consider more concentrate for added protection against freezing. Always consult the product guidelines for the best mix ratio specific to your needs.

Filling the concentrated Scania Coolant involves a few easy steps. Begin by locating the radiator cap and opening it carefully after the engine has cooled. Pour the coolant concentrate into the reservoir until it reaches the recommended level. Always double-check to avoid overfilling, as this could lead to leaks or engine issues.

A concentrated coolant contains higher levels of anti-corrosive and heat-resistant properties in a more compact form. Scania Coolant Concentrate is a prime example, offering users the ability to adjust their coolant's strength according to specific needs. This approach not only maximizes protection but also minimizes storage space since you need less product compared to traditional pre-mixed coolant. It’s an economical choice for those who require reliable engine performance.

Using 100% Scania Coolant Concentrate involves proper dilution with distilled water. For optimal results, mix the concentrate with water in a recommended ratio, usually or , depending on climate and operating conditions. After mixing, carefully pour the solution into the radiator or coolant reservoir of your vehicle. Regularly check the coolant level to maintain effective engine cooling.

The primary difference lies in the concentration levels. Coolant is typically a pre-mixed solution that is ready to use, while coolant concentrate requires dilution with water before application. Scania Coolant Concentrate is designed to be mixed with water in specified ratios, allowing users to customize the strength based on their engine needs. This flexibility helps in achieving superior cooling performance dependent on various environmental factors.

Scania uses Scania Coolant Concentrate for its vehicles. This formulated coolant provides excellent engine protection by preventing overheating and corrosion. By using Scania Coolant Concentrate, you ensure optimal performance and longevity for your engine under various operating conditions. Always consult your vehicle's manual for the specific blend recommended for your model.

Concentrated coolants are packaged to be diluted to a specific coolant concentration ratio i.e 50% by mixing with water. Pre-mix coolants are already diluted with water at a preset ratio normally between 33% to 50%.

The mixing ratio of water and antifreeze should lie between 60:40 and 50:50. This usually corresponds to antifreeze protection from -25°C to -40°C. The minimal mixing ratio should be 70:30 and the maximal 40:60. Further increasing the proportion of antifreeze (e.g. 30:70) does not lower the freezing point any further.