Get Harness And Lanyard Inspection Form

That's why it's so important for you to assess harnesses and lanyards for any defects before using them....Reviewing lanyards Is the fabric showing any discoloration or fraying? Are the cable lines snapped or slightly shredded? Are any of the attachments or clips bent or chipped?

Every harness must have a legible tag identifying the harness, model, date of manufacture, name of manufacturer, limitations and warnings. Check tag for date of manufacture and remove from service if past adopted service life policy •If tagging system is missing or not legible remove harness from service.

0:48 2:04 How to Inspect a Safety Lanyard - YouTube YouTube Start of suggested clip End of suggested clip Now check any other stitch patterns on the webbing to make sure there is no missing or frayedMoreNow check any other stitch patterns on the webbing to make sure there is no missing or frayed stitches. Check both sides thoroughly. If there are missing stitches. Or fraying take it out of service.

A safety harness inspection should be personally conducted before each use. When inspecting your harness look for stitching that may be broken, burned or pulled and stitching or rivets at hardware attachment points. Closely examine all webbing, belt ends, buckles and D-Rings. These few minutes could save your life.

Check “hardware” – D rings, buckles, keepers and back pads - for damage, distortion, sharp edges, burrs, cracks and corrosion. Inspect webbing for signs of cuts, abrasions, fraying, tears, burns, mould, discolouration or chemical attack. ... Check stitching for signs of loosening, pulling or cut thread.

What 4 Items Do You Look For When Inspecting A Lanyard? The key elements to look for are lanyard material (webbing, cable or rope), hardware (buckle, ring, snap hook), stitching and label.

HSE guidelines recommend an inspection by a professional service every 6 months but PPE regulations require a minimum of 12 monthly inspections which should be recorded on the harness itself.

ComponentsPass1Inspect snap hooks, carabiners, adjusters, keepers, thimbles, and D-rings. Inspect for damage, distortion, sharp edges, burrs, cracks, corrosion and proper operation☐2Other:☐WebbingPass3Inspect for cuts, burns, tears, abrasions, frays, excessive soiling and discoloration☐18 more rows