Get Underground Storage Tanks - Alaska Department Of Environmental...

This guide provides clear and comprehensive instructions for completing the Underground Storage Tanks form required by the Alaska Department of Environmental Conservation. By following these steps, users will ensure accurate submission and compliance with state regulations.

Follow the steps to fill out the form effectively.

1. Click ‘Get Form’ button to obtain the form and open it for editing.
2. Begin with the general information section. Fill in the purpose of the site assessment or release investigation by checking the appropriate box. Include the owner's name, phone number, and mailing address, ensuring accuracy in the details provided.
3. Provide the operator's information in the same manner, detailing the company or legal entity that operates the site, along with their contact details.
4. In the location of site section, specify the name and physical address of the site. It is crucial to be as specific as possible, as this information is vital for identification purposes.
5. Move on to the system and tank status. Describe the status of each tank, indicating whether they are currently in use, temporarily closed, or permanently closed. Also, include the tank's total capacity and contents.
6. In the firm conducting site assessment section, enter the name and contact information of the firm conducting the assessment and the names of supervisors and personnel collecting samples.
7. For the site history, respond to the various questions regarding previous contamination or assessments. If any answers are 'yes', provide additional details or attach the relevant reports.
8. Complete the field screening analysis with date(s), temperatures, and the type of detection instrument used. If no instrument was used, provide details on the detection method applied.
9. In the collection of soil samples, check the relevant boxes based on sample collection status and provide details for the number of borings and analyzed samples.
10. Follow with laboratory analysis of soil samples. Identify potential contaminants and list analytical methods used, including the range of results.
11. Complete the groundwater investigation section by answering the relevant questions regarding groundwater presence and the collection of samples.
12. In the release investigation section, document any identified petroleum contamination and provide relevant timelines and notifications made to ADEC.
13. Draw a site sketch or attach a site map that includes all pertinent details regarding the site layout, including locations of USTs and any contamination observed.
14. Complete the quality assurance section by indicating if there were deviations from established procedures.
15. Finalize by signing the certification section, ensuring that both the assessment firm's principal investigator and the UST owner/operator or designated representative provide their signatures.
16. Lastly, check the boxes for any attachments and ensure all required documents are included before submission.

Ensure your compliance by filling out the form accurately and submitting it online.