Rework Time Document For Free

Rework - is the effort put in for correction of defects in a non-conforming product. Rework could be done during or after inspection and is additional cost to the organization. Reduction of rework is one of the key focus area in Lean Six Sigma.

Rework is the process of correcting defective, failed, or nonconforming items after inspection. This process includes disassembly, repair, replacement, and reassembly.

5 Ways to Reduce Reworks and Errors Create a Quality Process. Preventing reworks and errors is more effective than spending time and resources fixing problems after they occur. ... Plan Out Work. ... Use a Checklist. ... Prioritize Task Assignments. ... Provide Training.

It is used as a result measurement to highlight the operational workstations that need improvement in the first quality. Rework rate (%) = (rework hours ÷ productive labor hours) × 100% or (total quantity of reworked (repaired) products ÷ total production quantity) × 100%.

Manufacturing rework is when manufacturers repair and reprocess materials, parts, or poor quality products into products that meet the necessary quality standards and criteria. In some manufacturing environments, items for rework can be confused with scrap or waste.

Rework Operations means operations occurring after the date and time of first production and shall include planning and direct administrative work and any single operation conducted in the wellbore of a well after it is completed to recomplete the well by performing Completion Operations on a zone that is not currently ...

The purpose of a Rework Procedure is to establish and maintain processes for rework for your organisation, including retesting and revaluation of the non-conforming product after rework is complete.