Install Break Notice For Free

The breakaway system stops your trailer in the event of a hitch failure, so you shouldn't attach it to any part of the receiver hitch. Your cable should be attached to part of the tow vehicle that has no chance of coming apart - the frame.

When towing, you must fit a breakaway cable to your trailer's braking system. A breakaway cable activates the trailer's brakes if the trailer becomes detached from the towing vehicle.

Mount the breakaway switch close to the trailer coupler so the cable can be attached to the vehicle. Also, mount the breakaway switch close enough to the battery box so their wires can connect. A typical position is on the outside of the trailer frame between the trailer connector and the battery box.

How to Connect a Trailer Breakaway Cable - YouTube YouTube Start of suggested clip End of suggested clip We'll take the snap hook. And clip it into the loop. That attaches the pin to the switch. ThisMoreWe'll take the snap hook. And clip it into the loop. That attaches the pin to the switch. This method gives a nice strong connection. And if you check your slack.

HOW TO FIX A BROKEN BREAKAWAY CABLE - YouTube YouTube Start of suggested clip End of suggested clip And then you can replace. It with your new one. So it's just as simple to replace as it was to takeMoreAnd then you can replace. It with your new one. So it's just as simple to replace as it was to take off all you do is place it in the hole push in till it snaps. And then take your carabiner.

Splice one of the two wires coming out of the breakaway switch into the trailer brake wire running from the trailer connector to the brakes. Connect the second wire coming out of the switch to the brake wire (blue) coming out of the battery box. This connection will send power to the breakaway switch.

Brake Pad Placement For Wear Sensors | Maintenance Minute YouTube Start of suggested clip End of suggested clip Because this is gonna wear out first and it's gonna give the driver the first indication that theirMoreBecause this is gonna wear out first and it's gonna give the driver the first indication that their brake pads are wearing out I'm Andru marquel. Thank you very much.