Blueprint Numbers Document For Free

Typically, the architect will identify each drawing with a letter and number. The letter denotes the plan series: A for architectural plans, S for structural engineering plans, E for electrical plans, M for mechanical plans, and P for plumbing plans. The number refers to a specific plan type.

Drawing numbers should be given in all memoranda whenever drawings are transmitted. The drawing numbers are a positive means of identification, and they minimize potential difficulties if drawings become detached from the transmittal memoranda.

Put your name, class color, and date in the top RIGHT hand corner 2022 Use a ruler to draw label lines 2022 Do not use arrows for label lines 2022 Label lines do not cross each other 2022 Label lines should point to the center of the structure being labeled 2022 Print all labels horizontally 2022 Print, do not write in cursive 2022 Label

Drawings are always organized from most general to most specific or specialized. Since plans are most helpful to see the overall design of the project, they come first. Elevations and sections are a bit more specific and come next followed by details and schedules, which are the most specific type of drawings.

The drawing number is used primarily for sheet to sheet linking, typically in, but not limited to; section details, section cuts, and detail callouts. Drawing Numbers are placed in CAD files, they consist of the discipline/sheet type designator followed by a hyphen and a number.

Drawing Labelstitle of the drawing.drawing number.scale of drawing.paper size.drawing sheet number of referenced drawing (where applicable, ie sections, elevations.)

The General Order of Drawings in a Set of Construction PlansG for General Sheets: Cover sheet, plan index, and location plans.A for Site and Architectural Plans: Floor plans, ceiling plans, roof plans, elevations, sections, wall sections, and others, depending on the architect's chosen level of detail.More items...?Oct 12, 2017