Follow the steps to successfully complete the form.

1. Press the ‘Get Form’ button to access the armstrong bracket information form and open it for editing.
2. Begin with the boat information section. Here, you will need to fill in the following fields: year, make/model, length, and color. For the color, please provide a sample if available.
3. Next, move to the transom information section. Enter the transom angle, thickness, and width. Specify the transom shape by selecting from notched, curved, or flat. Additionally, provide a reading for static water-line, indicating if the boat is bow heavy, stern heavy, or level.
4. For measuring the transom angle, follow the provided instructions carefully. Use a standard carpenter's square with dimensions of 22.5x14 inches, and ensure the long side is placed along the keel. Measure accurately from the inside corner of the square to the transom, noting that each ¼ inch corresponds to a degree in the transom angle.
5. If this form pertains to a repower, indicate the previous power type (I/O, O/B, SEA-DRIVE) and total horsepower before repower.
6. Fill in the engine information section. Specify the number of engines, year, make/model, total horsepower, top speed, and shaft length. Additionally, indicate if a kicker engine is present by selecting yes or no.
7. In the boat use section, check all applicable uses: cruising, fishing, diving, skiing, swimming, or other.
8. Provide your customer information, including name, address, city, state, phone, fax, and zip code. Additionally, supply measurements ‘A’ and ‘B’ related to the width of the transom at the top and bottom.
9. Indicate whether you want platforms by selecting yes or no. If yes, specify the platform width in inches. Also, state if a built-in ladder mount is requested and its location;
10. Once all sections are completed, review the information for accuracy and save your changes. You can then download, print, or share the filled-out form as needed.

Complete your armstrong bracket information form online today!