Get Eyswash Station Inspection - Tamworkerscomp.com

Filling out the Eyswash Station Inspection form is a crucial task to ensure safety in the workplace. This guide provides step-by-step instructions to help users accurately complete the online form to maintain compliance and promote safety standards.

Follow the steps to successfully complete the Eyswash Station Inspection form

1. Click ‘Get Form’ button to access the form and open it in the online editor.
2. Begin by entering the location of the eyewash station in the designated field.
3. Next, fill in the department that the eyewash station is associated with.
4. For each week, place the date and initials of the inspector/tester beside the corresponding week, indicating that the emergency eyewash was inspected and tested. Remember, use one form for each eyewash unit.
5. Follow the inspection criteria, ensuring that access to the eyewash station is unobstructed and document your findings. Check that protective eyewash covers are clean and intact.
6. Verify that the bowl and spouts are clean and devoid of any debris. Note this in the inspection record.
7. If it is a non-plumbed unit, place a pan or bucket under the drainpipe to collect water during flushing.
8. Activate the unit to assess the effectiveness and continuous flow. Ensure protective eyewash covers are removed upon activation.
9. Check that water flows from both eyepieces and evaluate the flow rate according to the manufacturer's instructions.
10. Document any problems observed with the eyewash station or safety showers in the provided field.
11. Once you have completed the inspection and filled out the form, save your changes. You can also download, print, or share the form as required.

Complete your Eyswash Station Inspection form online today to ensure workplace safety.