SPECIAL ORDER WORKSHEET Options for Multiple-Beam, Bolted Column Caps Page 1 of 2 Instructions for Ordering Multi-Beam Column Caps: 1. Choose Column Cap Style. Look at the configuration of the column.
Loading
Open form follow the instructions
Easily sign the form with your finger
Send filled & signed form or save
How to fill out the TC-CCLTC-WS13 - Simpson Strong-Tie online
Filling out the TC-CCLTC-WS13 - Simpson Strong-Tie is an essential process for ordering multiple-beam column caps. This guide provides clear instructions to help users navigate each section of the form with ease.
Follow the steps to accurately complete the TC-CCLTC-WS13 form.
- Click ‘Get Form’ button to obtain the form and open it in the editor.
- Choose the column cap style required. Review the configuration of the column caps, and refer to your plans if you are uncertain about which style to select.
- Fill in the dimensions of the column cap on the worksheet in actual inches, referencing the ‘Post and Beam Dimensions’ section if necessary.
- Determine the beam orientation by reviewing your plans or checking the configuration of the selected column cap. Mark the appropriate box that describes your beam's orientation.
- Choose the required style and strap orientation by checking the corresponding box.
- Select the finish for the column cap, with the standard finish being Simpson Strong-Tie® gray paint, and specify HDG if needed.
- Provide all applicable beam and post dimensions in actual inches in the 'Post and Beam Dimensions' section, ensuring that you use the correct measurements as outlined.
- Once all sections are completed, place your order by contacting Simpson Strong-Tie for ordering information.
Complete your TC-CCLTC-WS13 form online today to ensure a smooth ordering process.
Experience a faster way to fill out and sign forms on the web. Access the most extensive library of templates available.
Get answers to your most pressing questions about US Legal Forms API.
What are caps in construction?
A pile cap is a thick concrete mat that rests on concrete or timber piles that have been driven into soft or unstable ground to provide a suitable stable foundation.
What is the difference between post cap and column cap?
Column caps provide a high capacity connection for the column – beam combinations. Post caps provide a custom connection for post-to-beam combinations.
What is the top of a stone pillar called?
In architecture the capital (from the Latin caput, or "head") or chapiter forms the topmost member of a column (or a pilaster).
What are column caps?
Column caps provide an increased bearing area while securing a wood beam to a wood column. They transfer the load into the wood column and eventually into the foundation, generally eliminating the need for additional brackets or braces. Column caps come in a variety of sizes to accommodate any project.
What are post and column caps?
Bases and caps are an integral part of structural systems. Post and column bases secure the bottom of wood posts or columns to concrete foundation. Post and column caps support beams and transfer the loads from the structure above into the post or column.
What is Cctq?
Children's ChronoType Questionnaire (CCTQ)
How thick should a column cap be?
To achieve lateral loads, the LCC pipe must be welded to the column with an 1/8" fillet weld around the entire pipe. The CCOS must be attached to the column cap plate with (4) CCOS self-tapping screws through the end plate and into the bottom of the CCOS. Max column cap plate thickness = 1/2" and 3/16" Min.
Use professional pre-built templates to fill in and sign documents online faster. Get access to thousands of forms.
If you believe that this page should be taken down, please follow our DMCA take down process here.