Follow the steps to fill out the Aws D1 5 2010 Pdf with ease.

1. Click ‘Get Form’ button to obtain the form and open it in the editor.
2. Begin by entering the welder or welding operator's name in the designated space, followed by their identification number in the provided field.
3. Select the welding process by checking the appropriate box for manual, semiautomatic, or mechanized.
4. Indicate the position of the weld, specifying if it is flat, horizontal, overhead, or vertical. If vertical, note whether the welding is done upward or downward.
5. Input the WPS (Welding Procedure Specification) number to ensure compliance with required specifications.
6. Fill in the material specification and state the thickness range that qualifies the welder.
7. Provide the filler metal specifications, including the specification number and classification, as well as the F number.
8. Describe the filler metal if it is not covered by AWS specifications.
9. Indicate whether backing was used during the welding process.
10. State the diameter and trade name of the filler metal used.
11. Complete the section for visual inspection by noting the appearance, undercut, and piping porosity.
12. Document the guided bend test results by specifying the type of test conducted and the results in the designated areas.
13. Fill in the information for the laboratory tests, including the test conducted by and the test date.
14. Record the results of the fillet test, detailing the appearance, fillet size, fracture test root penetration, and macroetch observations.
15. Include details for the radiographic test results, entering the film identification numbers and remarks as necessary.
16. After completing all required fields and sections, review your entries for accuracy.
17. Finally, save changes, download, print, or share the form as needed to complete the process.

Complete the Aws D1 5 2010 Pdf online to ensure accurate documentation of welding qualifications.