Get Concrete Pre Pour Checklist

Filling out the Concrete Pre Pour Checklist is essential to ensure all elements of the pre-pour process are validated before beginning a concrete pour. This guide will help you navigate each section of the checklist with clarity and confidence.

Follow the steps to complete the Concrete Pre Pour Checklist effectively.

1. Press the ‘Get Form’ button to download the Concrete Pre Pour Checklist and open it in the online editor.
2. Begin with Section A: Plans. Confirm that the inspector has reviewed all plans and special provisions relevant to the concrete pour by checking the appropriate box.
3. Move to Section B: Forms. Verify that the forms are correctly positioned, aligned, and have been braced according to shop plans; note any corrections if necessary.
4. Check that all form cracks have been sealed and that the forms are clean and free of debris.
5. In Section C: Reinforcing Steel, ensure that all reinforcing steel has been sampled, approved, and meets the required cleanliness standards.
6. Confirm that the reinforcing steel is placed correctly according to the plans and that there is proper clearance between the steel and the forms.
7. Make sure that the reinforcing steel is tied and supported according to the specified plans.
8. Proceed to Section D: Concrete. Verify that concrete trucks and plant have been approved, and ensure all concrete materials are accepted.
9. Check that adequate curing and protection materials are available and have been placed.
10. Ensure slump and air tests have been performed on each truck and that test cylinders have been created.
11. Before the pour, make sure that all forms have been wet down to prepare for concrete placement.
12. After completing all sections, save your changes, download the form for your records, print it if needed, or share it with relevant stakeholders.

Complete your Concrete Pre Pour Checklist online today to ensure a successful concrete pour process.