Drywall Contract

Multiply drywall square footage by the going rate Once you have determined your sheet count and corresponding drywall square footage, you can multiply this by the contractor's square footage rate. You can use the total drywall square footage numbers to estimate both material and labor.

Cost to tape and mud drywall The national average for a total drywalling job, from start to finish, is $1.30 to $4 per square foot. Hanging just the unfinished drywall panels costs $0.24 to $2.25 per square foot. To finish the drywall, it costs $1 to $1.65 per square foot.

For minor repairs, expect to pay an average of $60 to $90 per hour for handyperson repair, or about $50 to 75 per square foot. To make DIY repairs, the price of materials comes to around $45 for a job requiring only one 4 by 8 foot sheet of drywall.

You must have a minimum of 4 years journeyman experience as well as pass a two-part exam issued by the Contractor State Licensing Board. California offers a study guide for the exam as well. Other states may offer this, depending on the exam and the region.

Register your drywall-finishing business name with your state's secretary of state. Fill out any necessary applications for tax identification numbers. Complete the paperwork if you plan to operate as a limited liability company, also known as an LLC, or as a corporation. Obtain a local business license.

In large commercial projects, the drywall contractor is one of the last specialty trades to work on a building. After the mechanical, electrical, and plumbing work has been completed, the project is at the stage for the drywall contractor to construct framing, install insulation, and place drywall.

Calculate how many drywall sheets you will need by dividing the total square footage of area by 32 (if you're using 4-by-8 sheets) or by 48 (if you're using 4-by-12 sheets). If you want to get the cost, just multiply the total number of sheets by the price per sheet. Remember to add local taxes and delivery charges.

Drywall CostsDrywall installation costs $1,845, with a typical range of $1,019 and $2,874. This translates into a price of $1 to $3 per square foot for materials and labor. Most homeowners pay $2 per square foot, depending on the number of rooms and the level of finish.

The threshold for performing certain work without a contractor license increased from $500 to $1,000. To qualify for the exemption, a contractor must perform work that is casual, minor or inconsequential. This means that the work cannot: Be structural in nature.