Size Numbers Record For Free

The second most common record size is a 7-inch disk, which spins at 45 RPM. This size is generally used for singles, with just one or two songs per side. Relatively uncommon these days is the 10-inch record, spinning at 78 RPM.

There are three standard record sizes to correspond with the three speeds: 12-inch: Twelve inches is the standard diameter for full albums, generally holding up to 22 minutes per side. ... 7-inch: While not as common as 12-inch records, 7-inch presses feature one or two songs per side and run at 45 RPM.

The three most common sizes are 7-inch, 10-inch, and 12-inch vinyl records. 7-inch vinyl. The 7-inch vinyl, also known as a single or a 45, is the smallest record size used for commercial releases. These records typically contain one track per side and are ideal for singles.

Since 45s travel faster than 33s, more waveform definition can be squeezed into the format, which takes up more room. More bumps and grooves created in pressing a 45 means better audio quality.

Look at the label: Many records will have the RPM printed on the label, usually near the center hole or on the back cover. Measure the diameter of the hole: A 33 1/3 RPM record will have a large hole in the center, while a 45 RPM record will have a smaller hole, and a 78 RPM record will have a very small hole.

The most frequent size of the vinyl records is 12?. Both sides of these records can store 45 minutes of music in total. The smaller sizes of 7? and 10? ? consequently allows storage of less music. Although important in distinguishing records ? size isn't the only way to identify what kind of vinyl record you have.

Generally speaking, all of the records that you would see down in a local record store (or a Barnes and Noble) are 33 RPM, 12-inch releases. There are some examples of 45 RPM records in the 12? form factor. They are often part of audiophile pressings or special releases.