Size Bullets Paper For Free

Smoothbore muskets were loaded with lead balls, slightly smaller than the diameter of the bore, to make them easier to ram down the barrel (especially as fouling built up); a "patch" of paper or cloth was wrapped around the bullet before inserting it into the barrel, to make it fit snugly, so it wouldn't roll back out ...

Sizing Cast Bullets with Lee Precision's Lube & Size Kit - YouTube YouTube Start of suggested clip End of suggested clip Next take the bullet collector. And place it on top of the sizing die facing away from the operator.MoreNext take the bullet collector. And place it on top of the sizing die facing away from the operator. And that's pretty much all there is to the setup. So let's go ahead and start sizing some bullets.

So we need to measure the diameter of the bullets we cast and compare it to a jacketed bullet. Also, too large a diameter in our cast bullet will bulge the casing when seating. Different sizing dies can produce a different diameter bullet. Some casters even go as far as to using a process called ?slugging?.

A paper patched bullet was and is used on lead cast bullets to act as a sort of jacket. served the same function as a metal jacket. It helped the bullet to engage the rifling without the bullet touching the rifling. This helped to prevent leading and allowed higher velocities.

Don't be fooled, a so called standard grease groove chamber will shoot paper patch just fine with either groove or bore diameter bullets.

The powder was black powder, meaning low velocities so these early rifles shot large, heavy bullets which carried a long way. When it was realised that if a piece of paper was wound around the bullet it kept the lead bullet from touching the metal bore of the rifle, the paper patched bullet was born.

Bullet, full metal jacket - A projectile in which the bullet jacket encloses the entire bullet, with the usual exception of the base. Also called Full jacketed, Full patch, Full metal case and Ball ammunition.